DIDAC INTERNATIONAL
Glass Distillation Apparatus

Glass Distillation Apparatus

Send Inquiry

Glass Distillation Apparatus 

  • Bi-distiller (Vollautomat), suitable for wall mounting and table mounting.
  • Very good distillate quality, conductance Mono-distillate approx. 2.2 ¼s / cm at 25 ° C; Conductivity Bi-distillate approx. 1.6 ¼s / cm at 25° C
  • Electronic level monitoring during the entire distillation process.
  • Electronic dirt detector switches the unit off when the water is heavily contaminated in the first stage distillation bubble, the red "Cleaning" indicator lights up.
  • Double water deficiency protection by float switch and second thermostatic overtemperature protection switch.
  • Energy saving by distillation of the heated cooling water.
  • Water saving by automatic shutdown. Unnecessary water consumption is avoided.
  • Distillation bubble easily accessible for cleaning purposes.
  • Distillate removal: for mono-distillate shut-off valve made of borosilicate glass 3.3 with chicks made of PTFE, for bi-distillate free drain with dust protection bell made of borosilicate glass 3.3.
  • CO 2 degassing opening on the condenser.
  • Radiator and distillation bubble made of stainless steel
  • Double-walled housing. Outer casing consists of electrolytically galvanized steel sheet, electrostatically powdercoated with epoxy resin.
  • Main switches and control lamps for monitoring both distillation stages are located on the front of the appliance.
  • Water supply via built-in solenoid valve with connection for water pressure hose 1/2 "(inner diameter approx. 12.7 mm).
  • Cooling water drain with hose connection 3/4 "( approx. 19.0 mm).
  • Hoses for water supply and drainage are available as additional equipment.

Glass Distillation Apparatus 

Power

4 L / H

Conductance

Mono-Distillate: 
Approx. 2.2 s / Cm At 25 ° C. 
Bi-Distillate: 
Approx. 1.6 s / Cm At 25 ° C. *

Type Of Distillation

Bi

Material

1st Stage: Stainless Steel 
2nd Stage: Duranglas

Control

Fully Automatic

Reservoir Contents

Without Storage Tank

Additional Features

Cooling Water Required

Approx. 120 L / H

Required Cooling Water Pressure

3 Bar To Max. 7 Bar

Outside Dimensions 
(W X D X H)

550 X 280 X 570 Mm

Electrical Connection

400 V / 50 ... 60 Hz / 7 Kw 3 Ph / N / PE Three-Phase Current **

Net Weight

About 27.5 Kg

Gross Weight (Carton On Pallet)

Approx. 54.0 Kg, Not Stackable