DIDAC INTERNATIONAL
Humidity Cabinet for Testing Rust Protection

Humidity Cabinet for Testing Rust Protection

Send Inquiry

Humidity Cabinet for Testing Rust Protection

Produces a moisture saturated atmosphere with continuous condensation at a constant 120°F (48.9°C) for 33 steel test specimens. Test panels are suspended on a 1/3rpm rotating stage. Air flow and water level control systems maintain required conditions inside the cabinet per Mil. Spec. and specifications. Air temperature is maintained at 120 ±2°F (48.9 ±1.1°C) by a digital LCD electronic controller. A continuous heater circuit assists the control heater in bringing the cabinet up to temperature prior to testing. Over temperature protection is provided by an adjustable digital thermostat which cuts off power to the cabinet in case of overheating.

Specification of Humidity Cabinet for Testing Rust Protection

  1. Capacity: 33 rust test specimens
  2. Water Level Control: 8 in. (203mm)
  3. Temperature Control Stability: ±2°F (± 1.1°C) (air temperature)
  4. Heater Range: 0-1500W
  5. Air Metering: 0.878±0.02832m3/h at standard temperature and pressure (31±1 ft3/h)
  6. Air Distribution: 20-diffuser manifold
  7. Rotating Stage: 1/3rpm
  8. Electrical Requirements: 115V 60Hz, Single Phase, 13.0A, 220-240V 50Hz or 60Hz, Single Phase, 6.8A