DIDAC INTERNATIONAL
Hybridization incubator

Hybridization incubator

Send Inquiry

Hybridization incubator

  • Microprocessor controlled temperature control.
  • Very good temperature consistency of ± 0.5 ° C.
  • Optimal temperature distribution throughout the working space by recirculation fan.
  • Electronic function monitoring of the temperature controller triggers optical alarm in the event of a fault. The heating is switched off, the cause of the fault is indicated by error codes on the LED display.
  • Temperature display and setting digital via LED display, in increments of 0.1 ° C.
  • Thermostatic over temperature limiter to protect the pipe heating element.
  • Folio keyboard with distinctive symbols.
  • High resolutions of the detections and uniform results due to the constancy of 10 rpm.
  • Variable bogie for max. 16 hybridization bottles.
  • Bogie detachable, interchangeable with up to five tilt-proof pull-out shelves.
  • Two switchable utility lights.
  • Interior parts of the appliance and bogie made of stainless steel.
  • Outer housing made of electrolytically galvanized steel sheet, powder coated.
  • Free view into the usable space through large-area acrylic glass window.
  • 2 Klammerscheiben 7940, 4 bottles 7945 as well as 8 spring clamps 7937 belong to the basic equipment.

Specification of Hybridization incubator 

Temperature Range

Approx. 8 ° C Above Room Temperature To 99.9 ° C

Temperature Constancy (Time)

± 0.5 ° C

Movement Type

Rotating

Number Of Revolutions

10 Rpm, Fixed

Maximum Load

5 Kg

Utility Room Lighting

2 Lamps - 25 W

Internal Dimensions (W X D X H)

400 X 330 X 380 Mm, Without Bogie

Outside Dimensions (W X D X H)

585 X 630 X 650 Mm

Electrical Connection

230V ± 10% / 50 ... 60Hz / 0.65kw *

Net / Gross Weight

45.0 Kg / 54.0 Kg