DIDAC INTERNATIONAL
Incubation And Inactivation Bath

Incubation And Inactivation Bath

Send Inquiry

Incubation And Inactivation Bath

  1. Incubation / inactivation bath Microprocessor controlled temperature control.
  2. The water bath is especially suitable for heating medical packs.
  3. Excellent temperature stability: ± 0.1 ° C at 50 ° C.
  4. Folio keyboard with distinctive symbols.
  5. Electronic function monitoring of the temperature controller. In the event of a fault, the cause of the fault is indicated in the display.
  6. Two independent over-temperature protection devices.
  7. Bath and tube radiators, cover frame, lid and sieve bottom made of stainless steel.
  8. Heat-insulating lid, double-walled with internal convexity, no dripping back of condensate into the glasses.
  9. Cover and sieve floor already included in delivery. The water bath 1005 is delivered in conjunction with the insert rack 1923 (additional device) without sieve tray.
  10. Corrosion-resistant outer housing made of electrolytically galvanized steel sheet, powdercoated.
  11. Drain cock at the back.

Incubation And Inactivation Bath

Temperature range

Approx. 5 ° C above room temperature to
+99.9 ° C
Temperature range
(operation with level controller)

Approx. 3 ° C via line water temperature to +99.9 ° C

content

Approx. 40 l

Internal dimensions (W x D x useful height)

410 x 296 x 315 mm

Outside dimensions (W x D x H)

510 x 490 x 445 mm

Electrical connection

230 V / 50 ... 60 Hz / 1.5 kW *

Net / gross weight

About 20.8 / 25.8 kg