Mono Distillation Unit Made Of Glass 2202

Mono Distillation Unit Made Of Glass 2202

Send Inquiry

Mono Distillation Unit Made Of Glass 2202

  1. Mono-distiller (full-automatic) made of glass, suitable for wall mounting and table mounting.
  2. Very good distillate quality, conductance Mono-distillate approx. 2.2 μs / cm at 25 ° C.
  3. Electronic level monitoring during the entire distillation process.
  4. Electronic dirt guard triggers automatic water changes for rinsing and cleaning the evaporator.
  5. Control of the water level in the evaporator with automatic current shutdown in case of water deficiency.
  6. Energy saving by distillation of the heated cooling water.
  7. Water saving by automatic shutdown. Unnecessary water consumption is avoided.
  8. Sterilization of the capacitors by vapor deposition.
  9. Visible operation due to non-fogging, unbreakable and easily removable front disc.
  10. Heating rods with quartz glass sheathing.
  11. Distillate removal on the right side of the appliance by means of a hose connection.
  12. CO 2 degassing opening on the condenser.
  13. Housing made of electrolytically galvanized sheet steel, electrostatically powdercoated with epoxy resin.
  14. Water supply via built-in solenoid valve with connection for water pressure hose 1/2 "(inner diameter approx. 12.7 mm).
  15. Cooling water drain with hose connection 1/2 inch (inside ø approx. 12.7 mm).
  16. Hoses for water supply and drainage are available as additional equipment.

Mono Distillation Unit Made Of Glass 2202


2 L / H


About 2.2 Μs / Cm At 25 ° C *

Type Of Distillation





Fully Automatic

Reservoir Contents

Without Storage Tank

Additional Features

Self Cleaning + Sterilization

Cooling Water Required

Approx. 48 L / H

Required Cooling Water Pressure

3 Bar To Max. 7 Bar

Outside Dimensions 
(W X D X H)

650 X 200 X 390 Mm

Electrical Connection

230 V / 50 ... 60 Hz / 1.5 Kw **

Net Weight

Approx. 16.0 Kg

Gross Weight (Carton)

Approx. 22.0 Kg