DIDAC INTERNATIONAL
Temperature Controller Corrosion Test Chamber

Temperature Controller Corrosion Test Chamber

Send Inquiry

Temperature Controller Corrosion Test Chamber

Features:

  1. Import PVC ploy plate test chamber, thickness is 5mm, durable temperature is 85 ℃
  2. Hidden water gauge for reagent supplement bottom, easy to clear without easy to break
  3. SUS#304 stainless steel pressure air barrel with high pressure resistance in good heat preservation
  4. Flat scaling test supporter, can adjust the angles and make the specimen sprayed fog around, many    specimens are allowed to be placed
  5. Manual push forward method of seal cover
  6. Water sealed method of test chamber to make sure the corrosion gas not leakage
  7. Right and left structure for control cabinet and test chamber, integrated structure for easy operation beautiful desktop overall structure

 Specifications

Lab Internal Dimensions

120x80x50

Lab External Dimensions

190x110x140

Lab Temperature

Saline testing method(NSS ACSS)35 °C ±1°C /Erosion-resistant testing method(CASS)50°C ±1 °C

Pressure Pot Temperature

Saline testing method(NSS ACSS)47°C ±1°C /Erosion-resistant testing method(CASS)63°C ±1 °C

Saline Temperature

35°C  ±1.0°C    50°C  ±1.0°C

Lab Capacity

 480L

SalineBox Capacity

  40L

Saline concentration

Sodium chloride solution with 5% concentration or less than 0.26g copper chloride is added to each liter of sodium chloride solution wit 5% concentration.

Compressed air pressure

 1.00 ± 0.01kgf/cm2

Spray volume

1.0~2.0ml/80m2/h (at least collecting 16 hours and take the average value)

Relative humidity in the lab

85% or  above 85%

Value PH

  6.5-7.2  3.0-3.2

Spary Methods

 Continual sparying

Power

AC220V1 20A