DIDAC INTERNATIONAL
Thermal Shock Environmental Test Chamber

Thermal Shock Environmental Test Chamber

Send Inquiry

Thermal Shock Environmental Test Chamber

  1. High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999 cycles. The maximum setting of each section is 999 Hrs 59 Mins.
  2. Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
  3. Both 2 zone and 3 zone shocks can be chosen.
  4. All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
  5. Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
  6. Machine can be shut down automatically in case of electrical power instabilities.

Specification:

 

  1. Internal Dimensions WxHxD(cm): 50x40*40
  2. External Dimensions WxHxD(cm): 150x193*160
  3. Temperature Range: (150°C~-65°C);(High temperature zone:+60°C~+150°C; Low temperature zone:-10°C~-65°C;)
  4. Heating Time (regenerative): RT~200°C about 35min
  5. Cooling Time (storage): RT~-70°C about 85min
  6. Temperature Response Time / Time Change: ≤5min /≤10seconds
  7. Precision Temperature Control / Distribution Accuracy: ±0.5°C /±2.0°C
  8. Inner and Outer Materials: The whole set is SUS 304# stainless steel treated with mist. Inner box is stainless steel
  9. Insulation Material: Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials
  10. Cooling System: Semi-hermetic double-stage compressor (water-cooled type) /Hermetic double-stage compressor (air-cooled type)
  11. Security Protection Devices: Non-fuse breaker, high and low pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system, electronic alarm
  12. Power: AC380V 50HZ/60HZ
  13. Weight (approximate): 1300